K&M - Dial Indicators Type:0.001" E = Expanding Mandrel

E = Expanding Mandrel

– custom hole fit per caliber (7mm shown)

Cutting Carbide Pilot

Highest BC's

Adjustable in all directions (horizontally

K&M - Dial Indicators Type:0.001" E = Expanding MandrelDial Indicator with 0. 001 resolution. 0. 001 resolution. For use with Arbor Press Standard Force Pack. Dial Indicator with 0. 0005 resolution. Installation: Install the dial indicator into the 3 8 port on the Micro Adjustable Neck Turner and snug up the black thumb screw. Zero the face of the dial indicator when the stem is against the pilot, now slide a case over the pilot and neck wall thickness can be measured directly. You can measure wall